The BRB2 continues to be a leader as a value-priced banner stand created for short term and less demanding display requirements. Developed for trade exhibits, point-of-purchase and any other promotional venue where portability, versatility and affordability are required, the lightweight system is easy to carry and sets up in a few seconds anywhere.

The BRB line of retractable banner stands has become one of our most popular due to its combination of lightweight design and value. The BRB2 features a new compact design halogen light fixture that really brings atttention to your display banner.

A optional hard case is now available - it can hold one BRB2 and a light fixture, or two BRB2 banner stands. It provides needed protection when shipping or flying with your banner stands.

Also available is a 2 sided BRB - two graphics in one compact banner stand. You can have the same graphic on both sides or a different one on each side.
2 Sided Version
SPECIFICATIONS
Stand Type Single/Double sided retractable stand
Weight Approx. 8 lbs. (single) 17 lbs. (double)
Construction Satin finish aluminium
Carry Bag Fitted nylon (standard) Hard case (optional)
Lighting Optional
Graphic Width 33-1/2"
Graphic Height 79" + 1" bleed at bottom
Hard case can hold two BRB2 stands or one stand and one light fixture
As with most of our retractable banner stands, the BRB2 can be used at 3 heights . This allows the stand to be used as a very effective tabletop display. The stands sectional poles allows three display heights - one pole is 22-1/4" high, two poles are 50-1/4" and all three are the full size of 79".
Click HERE for the BRB2 layout specs (PDF format)
Click HERE for the blank Illustrator template for BRB2
Description
1 unit
2-3
4-5
6-10
Code
Product #
BRB2 with Standard graphic
$295
$289
$283
$278
R
10 100
BRB2 with Deluxe graphic
$345
$338
$331
$325
R
10 101
NEW Double-sided BRB2 with 2 Standard graphics
$577
$565
$554
$542
R
10 110
NEW Double-sided BRB2 with 2 Deluxe graphics
$673
$659
$646
$633
R
10 111
NEW Optional Hard Case for BRB2
$119
$116
$114
$112
R
10 190
Halogen Light fixture for BRB2
$100
$98
$96
$94
R
10 191
Graphic Setup, file review, PDF proof
$60 per version
R
50 000
Graphic Panel Information
The Standard banner is printed on a white, satin finish polypropylene film. The banner is then coated with a thin, lustre finish overlaminate for protection of the printed image. This material is primarily intended for light duty or short term use.

The Deluxe banner is printed on white polyester film which yields very bright colors and sharp graphics. It is then coated with a scuff and fingerprint resistant overlaminate. The overlaminate provides for a high level of protection of the installed graphic and greatly extends the life of the banner.

Notes on preparing artwork for banner stands HERE.